WIMIUS T3 Mode D'emploi page 10

All manuals and user guides at all-guides.com
Refer to the follwering table parameters to adjust the output signal
from a computer
Type Resolution
VGA
PC
SVGA
XGA
Note: when there is a computer connected to the projector and the image
can not bedisplayed simultaneously, please set the display properties of
the computer, select the output mode for the CRT.
3.Video input socket：This port can be connected to the LD players, DVD
players, cameras and other video player video (VIDEO), the audio
output socket.
4.Audio output：Audio signal from the output port of the projector, such as
high power to play music, please connect to an external power amplifier
input.
Audio signal line
5.HDMI signal input：This interface can be connected to the output end
of a HDMI HD output player.When the projector connect to HD player, HD
set-top boxes, video games,hd (HDMI) signal connection can be used.
After connecting projectors and high-definition equipment with
high-definition cable (HDMI cable), connect the power cord or power
adapter, turn on the projector, press the "Source" button on the projector
Horizontal
Frequenc
y（KHz）
31.5
640×480
34.7
37.9
37.5
31.4
35.1
800×600
37.9
46.6
48.1
46.9
40.3
1024×768
48.4
56.5
60.0
Field VESA
frequency standard
（Hz）
60
√
70
72
√
75
√
50
56
√
60
√
70
72
√
75
√
50
60
√
70
√
75
√
9