Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
6. Attach slides (F) to each side panel of a premium or
ventilated wood tower (sold separately) with M6 x 10 mm
screws (DD). Note: Ensure the slides (F) are level with
one another.
Hardware Used
DD
M6 x 10 mm Screw
7. Insert the drawer into the premium unit by pressing
down the release levers on the runners and sliding the
drawer into the tracks of slides (F).
If you need to remove the drawer, extend it all the way
forward and then press the release level up on one side
and down on the other side. Pull out the drawer carefully.
6
Side Panel
F
x 4
DD
7
LL
Lowes.com/allenandroth
6
CARE AND MAINTENANCE
• Periodically check to make certain all components are properly positioned, free from damage
and firmly connected.
• Use a soft, clean cloth that will not scratch the surface when dusting.
• Never use water to clean the furniture as it may damage to the finish.
• Wipe clean using a damp cloth and a mild cleaner. Wipe dry with a clean cloth.
• In the event the furniture is stained or otherwise damaged during use, it is recommended
you call a professional to repair the furniture.
• Keep furniture away from direct sunlight as it may damage the finish.
• It is best to keep the furniture in a climate-controlled environment. Extreme temperature and
humidity changes can cause fading, warping, shrinking and splitting of wood.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
Drawer slide runner
Slide runners reversed.
can not slide into
slide tracks.
Drawer slides do not
The slide runners do not align
go smoothly.
with the slide tracks properly.
Drawer gaps are not
Slide runners are not level with
even missing period.
each other.
CORRECTIVE ACTION
Reinstall the slide runner and ensure the
opening of slide runner is pointing
backward.
Take out and repeat drawer installation.
Use the pilot holes on the tower (sold
separately) as a guide to level the slide
runners.
Lowes.com/allenandroth
7
Publicité
