Allen + Roth WSWS-DKFP1C Mode D'emploi page 3

ASSEMBLY INSTRUCTIONS
1. Install cam bolts (BB) into flat drawer front (A). Set
aside. Install wood dowels (CC) into drawer back (D),
then attach left drawer panel (B) and right drawer panel
(C) to drawer back (D) with M4 x 25 mm wood screws
(EE).
Hardware Used
BB
Cam Bolt
CC Wood Dowel
EE M4 x 25 mm Wood Screw
2. Insert drawer bottom (E) into drawer panel left (B),
drawer panel right (C) and drawer back (D).
3. Insert wood dowels (CC) into left drawer panel (B)
and right drawer panel (C). Attach drawer front (A) to
assembly, securing with cam locks (AA).
Hardware Used
AA
Cam Lock
CC Wood Dowel
1
BB
A
C
CC
x 4
LL
D
x 4
EE
x 4
2
Finished surface
E
C
D
3
A
CC
E B
AA
x 4
C
D
x 4
Lowes.com/allenandroth
4
ASSEMBLY INSTRUCTIONS
4. Press the release lever on slides (F) and
remove the slide runners.
B
EE
CC
B
5. Attach the previously removed slide runners to
left drawer panel (B) and right drawer panel (C) with
M3.5 x 12 mm wood screws (FF).
Note: Ensure the opening of the runner faces backward
on the drawer.
Then, remove the preassembled bolts from
drawer handle (GG). Insert drawer handle (GG) into
drawer front (A), securing from inside the drawer with
previously removed bolts.
CC
Hardware Used
AA
FF
M3.5 x 12 mm Wood Screw
GG Drawer Handle
4
Release Lever
UP
F
5
F
B
FF
A
x 6
F
FF
x 1
Lowes.com/allenandroth
5
FF
C
GG