Desa RCLP375B Manuel D'utilisation page 3

PRODUCT
IDENTIFICATION
Hot Air
Outlet
(Front)
Outer Shell
On/Off Switch
Inlet Connector
Figure 1 - RCLP375B Model
THEORY OF
OPERATION
The Fuel System: The hose/regulator
assembly attaches to the propane gas sup-
ply. The propane gas moves through the
solenoid valve and out the nozzle.
The Air System: The motor turns the fan.
The fan pushes air into and around the
combustion chamber. This air is heated and
provides a stream of clean, hot air.
The Ignition System: The direct spark
ignitor (DSI) sends voltage to the ignitor.
The ignitor ignites the fuel and air mixture.
The Safety Control System: This sys-
tem causes the heater to shut down if the
flame goes out. The motor will continue to
run, but no heat is produced.
103910
All manuals and user guides at all-guides.com
Handle
Power
Cord
Hose /
Regulator
Assembly
Clean
Heated
Air Out
(Front)
Air For Combustion Air For Combustion
Figure 2 - Cross Section Operational View
3
OWNER'S MANUAL
UNPACKING
1. Remove all packing items applied to
2. Remove all items from carton.
3. Check all items for shipping damage.
Fan
Guard
Combustion
Chamber
Ignitor
DSI
Nozzle
heater for shipment. Keep plastic cover
caps (attached to inlet connector and
hose/regulator assembly) for storage.
If heater is damaged, promptly inform
dealer where you bought heater.
Motor
Fan
Cool Air In
(Back)
Power
Cord
Solenoid
Hose/
Valve
Regulator
Assembly
Air For Heating
Air For Heating