Publicité
Les langues disponibles
Les langues disponibles
2. Hang the tall cabinet onto the GearTrack
Make sure all three brackets (P1) are fully engaged in the
■
slots as shown.
NOTE: For installation of the Gladiator
channels, please refer to the manual instructions included
with the Gladiator
GearTrack
®
The GearTrack
channels should be installed
®
with the spacing as shown.
ASSEMBLY INSTRUCTIONS
channels
®
GearTrack
®
®
channels.
®
30"
30"
Install the 24'' Flex Wall Cabinet
NOTE: Flex Brackets are sold individually and Gladiator
GearTrack
channels sold separately.
®
1. Attach two M6 x 16 hex socket head screws (F3) to the
bracket (P1) as shown.
X 1
P6
P6
F1
Pt: Bracket (1)
2. Attach the bracket (P1) to the wall cabinet's back top.
X 1
P6
F5
F3
Pt: Bracket (1)
F2: M6 hex flange nuts (4)
Attach the bracket (P1) to the wall cabinet's back top with
■
four M6 round head square neck bolts (F1) and four M6 flange
nuts (F2).
®
X 2
F1
F3: M6 x 16 hex socket head
screws (2)
X 4
X 4
F5
F3
P6
One bracket
required as
shown
F1: M6 round head square
neck bolts (4)
3
Publicité
