Publicité
Les langues disponibles
Les langues disponibles
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Tools and Parts
Gather the required tools and parts before starting installation.
Tools Needed:
1 Socket Wrench with 10mm Socket
■
4mm Hex Wrench
■
Tape measure
■
Parts Supplied:
Bracket(1)
■
M6 hex flange nuts (4)
■
M6 round head square neck bolts (4)
■
Bracket Use Requirements
Intended for use on Gladiator
■
cabinets (sold separately).
Install the 30" Tall Cabinet
NOTE: Flex Brackets are sold individually and Gladiator
GearTrack
channels are sold separately.
®
1. Install the brackets to the tall cabinet.
Attach the top bracket (P1) to the tall cabinet's back top with
■
four M6 round head square neck bolts (F1) and four M6 flange
nuts (F2).
Attach the center and bottom brackets (P1) to the tall
■
cabinet's back respectively with two M6 round head square
neck bolts (F1) and two M6 flange nuts (F2).
WARNING
Excessive Weight Hazard
Use two or more people to move and install cabinet.
Failure to do so can result in back or other injury.
2
BRACKET SAFETY
Your safety and the safety of others are very important.
DANGER
ASSEMBLY INSTRUCTIONS
Flex Cabinet Systems'
®
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
P6
®
Pt: Bracket (3)
F2: M6 hex flange nuts (8)
X 3
X 8
F5
F5
F3
P6
F1: M6 round head square neck bolts (8)
X 8
F3
Three brackets
required as
shown
Orientation of
the wall bracket
during assembly
Publicité
