DeWalt DW723 Guide D'utilisation page 5

Locking Locator Clip
The locking locator clip (G) keeps the saw from slid-
ing left or right during cutting operations. To move
the clip, remove saw/bracket assembly, loosen the
screw in the center of the clip, slide it to the desired
position and tighten the screw. You can then remount the saw/bracket
in the new location.
Removing the Saw
Once the miter saw is fastened to the brackets, it can be removed by
grasping the release levers, pulling up slightly to clear the beam and
can be set down in the rubber feet for transportation or cleaning.
Carry Handle
A handle has been supplied to safely transport the Miter Saw Stand to
and from the work site.
Accessories
Recommended accessories for use with your tool are available at extra
cost from your distributor or local service center.
CAUTION: The use of any non-recommended accessory may be
hazardous.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by authorized service centers or
other qualified service personnel, always using identical replacement
parts.
Three Year Limited Warranty
D WALT will repair, without charge, any defects due to faulty materi-
E
als or workmanship for three years from the date of purchase. This
warranty does not cover part failure due to normal wear or tool abuse.
For further detail of warranty coverage and warranty repair informa-
tion, visit www.dewalt.com or call 1-800-4-D
This warranty does not apply to accessories or damage caused where
repairs have been made or attempted by others. This warranty gives
you specific legal rights and you may have other rights which vary in
certain states or provinces.
In addition to the warranty, D
D
E
mal use, for free, any time during the first year after purchase.
If you are not completely satisfied with the performance of your
D
E
within 90 days from the date of purchase with a receipt for a full refund
– no questions asked.
RECONDITIONED PRODUCT: Reconditioned product is covered
under the 1 Year Free Service Warranty. The 90 Day Money Back
Guarantee and the Three Year Limited Warranty do not apply to recon-
ditioned product.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-DEWALT for a free
replacement.
WALT (1-800-433-9258).
E
3
WALT tools are covered by our:
E
1 YEAR FREE SERVICE
WALT will maintain the tool and replace worn parts caused by nor-
90 DAY MONEY BACK GUARANTEE
WALT Power Tool, Laser, or Nailer for any reason, you can return it