Publicité
Les langues disponibles
Les langues disponibles
AUTO OFF (STAND BY)
• The iron is equipped with a auto-off mode (stand by) after 8 minutes in the upright
position or 30 seconds if left flat, assuming user has not performed any action during
this period. The iron will beep every 25 seconds and LED will flash red.
• To resume ironing just touch the trigger or move the iron.
AUTO SHUT OFF BYPASS
For those who want to leave their iron on for periods longer than 8 minutes at a
time (without the automatic shut off system activating) the Velocity 240IR has
a auto bypass feature that allows the iron to stay on indefinitely.
To activate this feature, with your hand completely off of the sensor handle,
simply press the steam on/off button (E) for 5 seconds.
After holding the steam button for 5 seconds, the LEDs will flash for 5 seconds
indicating that the auto shut off bypass has been deactivated.
When the iron is unplugged, the auto shut off bypass returns to its default
position.
Do not leave your iron unattended while the auto bypass feature is activated.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
•
Unplug the appliance from the main power supply.
•
Drain the water out of the appliance.
•
Clean the appliance.
CLEANING
•
Disconnect the appliance from the mains and allow it to cool
before undertaking any cleaning task.
•
Clean the equipment with a damp cloth then dry.
•
Do not use solvents, or products with an acid or base pH such as bleach, or
abrasive products, for cleaning the appliance. Never submerge the appliance
in water or any other liquid or place it under running water.
12
Publicité
