Publicité
Les langues disponibles
Les langues disponibles
•
Do not use temperatures higher than those indicated on the garments to
be treated.
•
AUTO Temperature for silk, wool, polyester and other synthetic fibres
•
TURBO Temperature for cotton or linen
If garment has various kinds of fibers, select the temperature for the fiber that
requires the lowest temperature. (For example, select the temperature for polyester
for an article made out of 60% polyester and 40% cotton).
Wait until the indicator is lit steady green, this means that the appliance has
reached temperature, while it is heating or cooling the indicator will flash red.
SENSOR HANDLE
•
The 240IR is equipped with a presence sensor (F) that instantly shuts off the
steam outlet if the handle is not being held. This leads to energy savings and
increased autonomy of the water tank (lower water consumption).
•
Steam flow is automatically re-established by holding the handle on the iron
•
Removing your hand from the handle does not switch off the selected steam
function, it only interrupts the steam flow temporarily until it detects that
the handle is being gripped again.
DRY IRONING
•
The appliance has a steam control button (E) which, when set to off, allows dry
ironing (without steam) or with steam if it is switched on, a light indicates its
status, on/enabled off/disabled.
STEAM IRONING
•
It is possible to iron with steam as long as the tank has water and at any
setting.
VERTICAL IRONING
•
It is possible to iron hanging curtains, items of clothing on their own hanger,
etc. To do so, follow these instructions:
•
Iron from top to bottom.
•
Important: for cotton and linen, it is recommended to put the base of the iron in
contact with the material. For other more delicate fabrics, it is recommended to
keep the base of the iron a few centimetres away.
11
Publicité
