Publicité
Les langues disponibles
Les langues disponibles
DV2-WS / PR105DV / PR106DV / PR115DV / PR116DV / PR117DV
4.
Attach the metal plate to the other side of the refrigerator with 3 screws. Screw
the feet into the openings provided for this purpose.
5.
Next, place the unit back on its feet. After this, you can place the door on the
lower hinge. Attach the door to the upper hinge. To do this, screw 3 screws
into the holes provided. Cover the upper hinge and the screw holes with the
hinge cover. Make sure that the rubber seal seals nicely. If this is not the case,
repeat step 2.
Remove all packaging materials and any promotional stickers before use. Clean the
inside of the unit with lukewarm water and some bicarbonate of soda (5ml for 0.5l
of water). Do not use soap or detergent as the smell may linger. Dry the appliance
thoroughly
Temperature Control
The thermostat is located on the back of the appliance and can be set to MIN
(cold), NORMAL (colder) and MAX (coldest).
6. USE
52
Publicité
