Deliverables And Unit Description; Before First Use - Reer 33030 Mode D'emploi

Foodball
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11

Deliverables and unit description

By heating water with the device, you can quickly, reliably and automatically warm up milk
and baby food. The water is heated with a heating plate at the bottom of the device, provid-
ing the heat for food that needs to be warm.
14
Dust protection lid
Food container with
integrated measuring cup
Rotary switch for
temperature adjustment
Temperature range scale
Operating lights
Device bottom with integrat-
ed heating plate
1 × Instruction manual
Symbols:
Device is switched off
Warming small feeding bottles
Warming big feeding bottles
Warming baby food in a glass or a food container
Function for maintaining heat

Before first use

With the device, you can reliably and comfortably warm up standard and wide-neck bottles
and baby food bottles. The water is heated with a heating plate at the bottom of the device,
providing the heat for food that needs to be warm.
Always keep the device on a dry and level surface. Make sure that there is enough water in
the device when warming food in it. When a bottle or other container is placed in the device,
the internal water container must be filled with water up until about 1 cm from the edge.
1. Warming feeding bottles
To let vapour escape the bottle, remove the spill protection between
the bottle and the teat. Place the baby
bottle in the device and fill the water container up with warm water
until it reaches approximately 1 cm from the edge of the container.
Set the rotary switch on the front side of the device to the desired tem-
perature range
or . The orange operating light turns on. This signals
that the device is in operation and switches on and off whenever the
heating is on or off.
The warming time depends on the temperature of the water, the am-
bient temperature, the size of the bottle and its material. To speed
up the procedure, we recommend using warm tap water. The warming time for a bottle is
about 6–10 minutes, depending on the factors mentioned above, as well as on the initial
temperature of the baby food.
15

Publicité

Table des Matières
loading

Table des Matières