Description And Contents; Warming Of Baby Bottles - Reer Simply hot Mode D'emploi

Information about environmental protection:
At the end of its service life, this product may not be disposed of in the normal
household waste. It must be handed in at a collection centre for recycling electrical
goods. The symbol on the product, in the instructions manual or on the packaging
indicates this. The materials used can be recycled according to their label. By recycling,
reusing the materials or using old appliances for other purposes, you are making an
important contribution towards protecting our environment. Please enquire at your
local community administration about the appropriate recycling centre.

3. Description and contents

This appliance allows rapid, reliable and automatic heating of baby food and other suitable foods by heating water.
The water is heated through a hotplate in the base of the appliance and transfers its heat to the food to be warmed.
After reaching the preset temperature range, the appliance switches off automatically.
a) Base of the appliance with integrated hotplate
b) Indicator light for operation
c) Setting for the temperature range (rotary switch)

4. Warming of baby bottles:

The appliance comfortably and reliably warms standard and wide neck bottles. The water is heated by a hotplate in
the base of the appliance, which transfers its heat to the food to be warmed.
Starting up
To allow steam to escape from the bottle, remove the sealing disc between bottle
and teat. Place the baby bottle in the appliance and fill the water tank with water up
to about 1 cm from the top edge of the tank.
Turn the rotary switch (c) at the front of the appliance to the desired
temperature range. The red operating light (b) lights up. This signals to you
that the appliance is in operation. The operating light (b) goes off at the end
of the warming period.
Note: You can also keep baby food warm for a certain length of time using the baby food warmer.
However, this should not exceed one hour for microbiological reasons (formation of germs). To
do so, simply leave the bottle or jar in the appliance after warming up, and switch the rotary
switch (c) to the position for keeping warm.
Remove the bottle from the baby food warmer and turn the rotary switch (c)
for the adjustment of the temperature back to the Off position at the end of
the warming procedure. Unplug the appliance from the socket and pour the
water out of the baby food warmer.
Caution: Before you feed your child, you must check the temperature of the contents. To do this,
shake the bottle to distribute the heat evenly throughout and pour 2-3 drops of the contents onto
the back of your hand.
All manuals and user guides at all-guides.com
- 7 -
a
b
An integrated thermostat regulates the
water temperature
Caution:
Always place the appliance on a dry
and flat surface. Please ensure that
there is enough water in the tank when
warming food. If a bottle or other con-
tainer is inserted, the water tank must
be completely filled with water, up to
1 cm from the top edge of the tank.
The optimal temperature of the food is
reached after about 6-8 minutes. The
duration may vary depending on the
temperature of the water, the ambient
temperature, the size and material of
the bottle.
Symbols:
Appliance is switched off
Warming of milk bottles and
baby jars
Warming of milk bottles
and small baby jars
Warming of large
baby jars
c