Dometic 9600000523 Instructions De Montage Et De Service page 14

Technical description
5 Technical description
The camera with integrated microphone, which is encased in an aluminium housing,
transmits image and sound to a monitor via a cable. The infrared LEDs improve night
vision.
The camera transmits the image as if you were looking in the rear-view mirror.
The camera consists of the following elements:
No. in
Description
fig. 9, page 5
1 6-pin connection cable
2 Infrared LEDs
3 Microphone (rear side)
6 Information on electrical connection
6.1 Laying cables
A
NOTICE! Beware of damage
• When drilling holes, check beforehand that there is sufficient space
on the other side for the drill head to come out.
• Cables and connections that are not properly installed will cause
malfunctions or damage to components. Correct installation of
cables and connections ensures lasting and trouble-free operation of
the retrofitted components.
• The cables may not be exposed for long periods to solvents such as
benzene, since solvents can damage the cable.
Therefore, please observe the following instructions:
• As far as possible, use original ducts for laying the cables, or other suitable
options such as panelling edges, ventilation grilles or dummy plugs. If no
openings are available, you must drill holes for the cables. Check beforehand
that there is sufficient space on the other side for the drill head to emerge.
• Wherever possible, lay cables inside the vehicle, as they are better protected
there than outside.
If you do need to lay a cable outside the vehicle, ensure that it is well fastened (use
additional cable ties, insulating tape etc.).
14
All manuals and user guides at all-guides.com
CAM45
EN