Dometic 9600000523 Instructions De Montage Et De Service page 12

Safety and installation instructions
Observe the following instructions when working with electrical parts:
• When testing the voltage in electrical cables, only use a diode test lamp
(fig. 1 8, page 3) or a voltmeter (fig. 1 9, page 3).
Test lamps with a bulb (fig. 1 12, page 3) consume voltages which are too high
and can damage the vehicle's electronic system.
• When making electrical connections, (fig. 3, page 4), ensure that:
– they are not kinked or twisted
– they do not rub on edges
– they are not laid in sharp-edged ducts without protection.
• Insulate all connections.
• Secure the cables against mechanical wear by using cable binders or insulating
tape, for example on existing cables.
The camera is watertight. However, the seals on the camera cannot withstand a
high-pressure cleaner (fig. 4, page 4). Therefore, you should observe the following
instructions when handling the camera:
• People (including children) whose physical, sensory or mental capacities or
whose lack of experience or knowledge prevent them from using this product
safely should not use it without the supervision or instruction of a responsible
person.
• Do not open the camera, as this impairs the leak tightness and the function of the
camera (fig. 5, page 4).
• Do not pull at the cables, as this impairs the tightness and the function of the
camera (fig. 6, page 4).
• The camera is not suitable for use under water (fig. 7, page 4)!
12
All manuals and user guides at all-guides.com
CAM45
EN