OVE MALLORY 60 Manuel D'installation page 12

1. Install the 2 top rollers (K) on the door glass panel (C). Use a ratchet to strongly tighten the blots.
2. Insert the door bottom seal strip (L) onto the door panel (C).
3. Gently hang the door panel by its 2 top rollers on the support bar (D) and make sure to place the bottom of the door
inside the guide (E).
4-5. Install the 2 glass panels seal strips (F). Install the door's vertical seal strip (G) on the closing end.
6. Position the 2 roller stoppers (M) in order to block the door panel (C) from hitting the walls either when opening it or
closing it. Use the Allen key to strongly secure the stoppers when their final position is found.
7. Install the 2 bottom rollers (K) on the door glass panel (C).
Note: Adjust the 4 rollers to ensure proper closing of the door. Then use a ratchet to strongly tighten
8. Using silicone, install the decorative metal track (J) in front of the door panel. Slide the decorative end caps (LL)
onto the track (J).
DOOR PANEL INSTALLATION
the bolts.
1
HH
JJ
3
E
5
C
7
HH
JJ
12
K
C
C
F
G
J
K
C
2
C
L
4
6
M
C
8
LL