Télécharger Imprimer la page

Protect KN-6036M Mode D'emploi page 25

Publicité

Les langues disponibles

Les langues disponibles

water or detergent for cleaning. Clean the device with a dry cloth.
Use a small soft brush if necessary. It is recommended that you
periodically check the condition of the power cord. If necessary,
replacement requires the use of a special tool : contact an
authorized service center for repairs. If the unit is not used for a long
time, store it away from dust and moisture ; We recommend using its
original packaging. If the unit was in operation, allow it to cool down
as needed.
8. DISPOSAL
Please read the sections Important safety instructions and
Warning for the rechargeable lead-acid battery carefully.
Rechargeable lead-acid battery RB460B - 4V6.0Ah (BAT4V6AH).
This unit is not designed to modify/replace its battery.
After the battery lifetime has been reached, dispose of the
appliance. To remove the battery from the appliance, properly
remove the 4 pads under the base of the unit (using a small flathead
screwdriver). Once the pads are removed, loosen and remove the 4
screws. You will then be able to access the old battery. Disconnect
the battery connectors. Dispose of the battery safely in accordance
with current regulations. The battery must be removed from the
appliance before it is disposed of.
9. TECHNICAL SPECIFICATIONS
Reference : KN-6036M
Power source : 220-240V~ 50/60Hz
Dimensions packaging : 15.3 x 15.3 x 27.3 cm
Gross weight : 1.20 kg
Net weight : 1.00 kg
Power consumption : 12 W
Autonomy : 3 hours with full charge on LED strong light or 100 hours
on LED weak light
Lumens : 430
Rechargeable lead-acid battery : RB460B - 4V6.0Ah maintenance
free (BAT4V6AH)
25

Publicité

loading