Protect KN-6036M Mode D'emploi page 23

4. DESCRIPTION
1. Handle
2. Transparent cover
3. Light switch
4. Charge indicator
5. HOW TO CHARGE
Before charging or recharging your appliance, carefully read
the section warning for the rechargeable lead-acid battery in
this manual.
The device can be recharged in 2 different ways.
- AC charging : Using the included power cord, plug the cable into
the AC socket at the back of the device and plug into the power
outlet. The charge indicator lights red during charging.
- DC 12V charging : You can also recharge the lantern using the
12V DC input (cord not included).
Once the battery is fully charged, the charge indicator turns green.
Then disconnect the AC or DC power cord. Your device is ready to
use.
5. USB 5V output
6. DC 12V input
7. AC socket (power cord included)
23