Publicité
Les langues disponibles
Les langues disponibles
Trouble shooting
Repairs should be performed by a licensed technician only. Improper repair
may result in considerable danger to you and others.
However, some minor problems can be resolved as follows:
Problem
Not ignited
Badly ignited
Noise made when
combusted and ignited
Flame goes
out when in
use.
Yellow Flame
Unstable Flame
Gas Smell
■ If problem is not solved, please contact customer care centre.
Probable cause
No spark.
The burner lid is badly assembled. Assemble the lid correctly.
The gas supply is closed.
The gas supply is not
completely open.
The burner lid is badly assembled.
The ignition plug is contaminated
with alien substance.
The burners are wet.
The holes in the flame
spreader are clogged.
The burner lid is badly assembled.
The flame supervision device is
contaminated with alien
substance.
Product being cooked has boiled
over and extinguished the flame.
A strong draught may have
blown the flame out.
The holes in the flame
spreader are clogged.
Different gas is used.
The burner lid is badly assembled.
Gas leakage
Check the electricity supply.
Open the gas
supply completely.
Open the gas
supply completely.
Assemble the lid correctly.
Wipe alien substance with
a dry cloth.
Dry the burners lids carefully.
Clean the flame spreader.
Assemble the burner
lid correctly.
Clean the flame
supervision device.
Turn off burner knob. Wait
one minute and reignite zone.
Please turn off zone and
check cooking area for
draught such as open
windows. Wait one minute
and reignite zone
Clean the flame spreader.
Check the gas used.
Assemble the burner
lid correctly.
Stop using the product and
close the middle valve. Open
the window to ventilate.
Contact our service centre by
using a phone outside.
22
Solution
V.3
Publicité
