Télécharger Imprimer la page

PROUSER IBC26000B Mode D'emploi page 11

26a chargeur de batterie intelligent 12v & 24v avec fonction bluetooth convient aux batteries 12,8v lithium & aux batteries plomb en 12v et 24v: seches, gel, vrla, agm, calcium, sans entretien (sm/mf), d'une capacité de 25-500ah

Publicité

Les langues disponibles
  • FR

Les langues disponibles

LCD DISPLAY
Item
Description
Wrong Polarity: This symbol flashes if a battery was connected in reversed
polarity. Check the polarity and connection and reattach the charging cables.
Defective-Battery:
-
As soon as the battery charger has been connected to the mains,
the charger analyses the connected battery: If the battery voltage
is lower than 2.0 V or higher than 28 V, the battery is not suitable
or defective and the "Defective-Battery"-symbol lights up.
-
If the connected battery is charging in "RECOVER-12V"-Mode and
after 3 hours the battery´s voltage is still not higher than 12V the
battery is also considered as defective.
Not Connected: This symbol flashes if no battery is connected or the
connection is interrupted. Check the connection and reattach the charging
cables.
Battery-level:
This symbol will flash during the charging process. The bars indicate the
progress:
1 bar (20%), 2 bars (40%), 3 bars (60%), 4 bars (80%), 5 bars (90%)
If the symbol stops flashing, the battery is considered as fully charged and
the charger will switch automatically to "Maintenance / Trickle charging" to
keep the battery in a fully charged state.
11

Publicité

loading