Publicité
Les langues disponibles
Les langues disponibles
POWER
TV POWER
TV INFO
TV
VOL
MUTE
CH
3D
SOUND
SOUND
MODE
POWER
TV POWER
INPUT
S.VOL
SELECT
TV INFO
TV
AUTO
VOL
CH
MUTE
DIMMER
DRC
POWER
3D
SOUND
SOUND
MODE
INPUT
S.VOL
SELECT
POWER
AV SYNC
TV POWER
AUTO
DIMMER
DRC
POWER
AV SYNC
AH59-02380A
AH59-02380A
TV INFO
TV
VOL
MUTE
CH
3D
SOUND
MODE
SOUND
POWER
TV POWER
INPUT
S.VOL
SELECT
TV INFO
TV
AUTO
VOL
MUTE
CH
DIMMER
DRC
POWER
3D
SOUND
SOUND
MODE
INPUT
S.VOL
SELECT
AV SYNC
AUTO
DIMMER
DRC
POWER
AV SYNC
AH59-02380A
AH59-02380A
SOUND
MODE
POWER
TV POWER
TV INFO
TV
VOL
MUTE
CH
3D
SOUND
SOUND
MODE
POWER
TV POWER
INPUT
S.VOL
SELECT
TV INFO
TV
AUTO
VOL
CH
MUTE
DIMMER
DRC
POWER
3D
SOUND
SOUND
MODE
INPUT
S.VOL
SELECT
AV SYNC
AUTO
DIMMER
DRC
POWER
AV SYNC
AH59-02380A
AH59-02380A
SOfTWare UPgraDe
Samsung may offer upgrades for the Crystal Surround Air Track's
system's firmware in the future. Please visit Samsung.com or contact
the Samsung call center to receive information about downloading
upgrades and using a USB drive. Upgrades will be possible by
connecting a USB drive to the USB port located on your Air Track.
▪
Insert a USB drive containing the firmware upgrade into the USB port on the back of the main unit.
▪
Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The
main unit will turn off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings. We recommend
you write down your settings so that you can easily reset them after the upgrade.
▪
If the firnware fails to upgrade, we recommend formatting the USB data in FAT16 and trying again.
▪
For upgrading purposes, do not format USB data in NTFS because it is not a supported file system.
▪
Depending on the manufacturer, the USB may not be supported.
1
using the DRC function
This feature balances the range between the loudest and quietest sounds.
You can use this function to enjoy Dolby Digital sound when watching
movies at low volume at night.
Press DRC on the remote control of this unit.
•
Each time the button is pressed, the selection changes as follows :
DRC MIN ➡ DRC STANDARD ➡ DRC MAX
using the S.VoluMe function
This will regulate and stabilize the volume level against a drastic volume
change in case of a channel change or scene transition.
Press S.Vol on the remote control of this unit.
•
Each time the button is pressed, the selection changes as follows :
SMART VOLUME ON ➡ SMART VOLUME OFF
using the input mode
You can select either Optical Digital, Audio input.
Press inpuT SeleCT on the remote control
(
) on the front panel repeatedly to select the Optical Digital, Audio input.
input mode
Optical Digital input
audio input
,
or touch inpuT SeleCT
SOUND
SOUND
MODE
MODE
Display
DIGI.1
DIGI.2
ANALOG
Publicité
