Taurus ALPATEC AC 205 RVKT Mode D'emploi page 20

English
- The plug must be easily accessible so
it can be disconnected in an emergency.
- To achieve the highest efficiency from
the appliance it should be situated
in a place where the atmospheric
temperature is between 12 and 32ºC.
- Ensure that the extraction pipe remains
in a horizontal position. (Fig 2)
- Do not add new sections to the
extraction tube provided, as it could
cause the appliance to malfunction.
- The appliance should be used with its
base feet fitted.
- The appliance should be used with its
wheels attached.
Utiliser l'appareil avec les roues.
Assembly of the exhaust hose
-Lengthen one head of the hose, and
spin the exhaust hose into exhaust
conector (counter-clockwise).
Installation of window kit
-Partially open the window and then fix
the window kit to the window.
-The window kit can be installed on
most of normal and vertical windows
and it is adjustable.
- Fix the other end of the heat-exhausted
hose to the air-outlet window kit.
Notice AC 205 RVKT.indb 20
Instructions for use
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Press the ON/OFF button, the unit will enter in
cooling mode with low fan speed.
- Press the mode button to select cooling
dehumidifying, fan and heating mode.
Fan Speed:
- Under the cooling and the fan mode, the speed
goes as follow:
- Lower Fan High Fan.
- Under the dehumidifying mode, fan is working
in low speed.
Timer function:
- The appliance´s operating time can be controlled
from 1~24h.
- Press that button. If you press the button once,
the appliance will working 1 hour, if you press
twice, 2 hours etc up to 24 hours.
- Auto-shut off timer is only available when the
unit is on.
- Under the cooling and heating mode, the setting
temperature ranges from 16º~31ºC.
Swing:
- Press this button to control the movement of the
louver.
Cooling mode:
- Press mode to select cooling mode, cooling
mode indicator turns on.
- Press Up or Down to adjust temperature from 16ºC
to 31ºC.
- Press speed to select high or low fan speed.
Fan mode:
- Press mode to select fan mode fan indicator
turns on.
- Press speed to select high speed or low speed.
- Temperature and sleeping function cannot be
setup.
Dehumidifying mode:
- Press "MODE" to select dehumidifying mode,
dehumidifying mode indicator turns on.
- Under dehumidifying mode, sleeping function
cannot be setup, and fan speed is low.
Sleeping mode:
- Press key "SLEEP" enter into sleeping mode,
default value of fan speed is low.
08/04/2016 09:41