Publicité
A06113901_rev1SanitaireProS5000A.qxp_Layout 1 8/24/18 9:58 AM Page 14
ENGLISH
How to maintain cont.
How to replace the brushroll
CAUTION
!
Make sure vacuum cleaner is turned off
and unplugged.
• Routine maintenance of your cleaner will help
avoid unnecessary service calls. Check the
brushroll often.
• Lay cleaner on its side so that brushroll side plate
is on top.
• Press brushroll release button (A). While holding
button down, lift off side plate (B).
• Rotate brushroll forward (clockwise) and lift out.
Remove debris and/or hair.
• Slide cleaned (or new) brushroll back into housing
and turn counterclockwise until it locks into place.
• While pressing brushroll release button (A),
press the side plate (B) back into place.
14
www.sanitairecommercial.com
B
A
B
A
Publicité
