TCL Sweeva 6000 Manuel D'utilisation page 31

List of Faults
When the main machine fails, the red indicator light on the main machine will flash, and the relevant voice
prompts will be heard at the same time. If you still cannot solve the fault according to the prompts, please
contact our after-sales service department.
Voice Prompt
Error 1: The battery is abnormal.
Please refer to the user manual
or the APP.
Error 2: The wheel module is
abnormal. Please refer to the
user manual or the APP.
Error 3: The side brush module
is abnormal. Please refer to the
user manual or the APP.
Error 4: The fan is abnormal.
Please refer to the user manual
or the APP.
Error 5: The rolling brush is ab-
normal. Please refer to the user
manual or the APP.
Error 6:The laser sensor is ab-
normal. Please refer to the user
manual or the APP.
Error 7:The charging is abnor-
mal. Please clean the charging
contact area.
All manuals and user guides at all-guides.com
• Please open the battery compartment and check whether the battery is properly connected,
and restart the machine.
• The battery temperature is too high or low. Please do not use it until the battery return to the
normal temperature (0℃～40℃/32°～104°F).
• Please check whether the wheels are stuck with foreign objects, and restart the machine.
• Please check whether the side brush is stuck with foreign objects, and restart the machine.
• Please check whether foreign objects are stuck in the fan port, and restart the machine.
• Please clean the dust box and filter, and restart the machine.
• Please remove the rolling brush, and clean the rolling brush, connection part of the rolling
brush, rolling brush cover and the dust suction port.
• Please restart the machine after cleaning.
• Please check whether there are foreign objects on the laser sensor, and restart the machine
after cleaning.
• Please check whether the charging area is contaminated, and clean the charging pole pieces.
• Please check whether the battery is installed properly.
2 7
Solution
EN