TCL Sweeva 6000 Manuel D'utilisation page 17

Installation Instructions
① Installation and placement of Sweeva 6000 charging dock
Connect the charging dock with the power adapter, and be
sure to organize the adapter cable to prevent the robot
vacuum from being entangled during cleaning.
Place the charging dock against and perpendicular to the
wall on a level, hard floor, without obstacles within 1.5m in
front and 0.5m on the left and right.
All manuals and user guides at all-guides.com
1 3
Note:
Install the charging dock in a position where the robot
*
vacuum can easily reach. It is recommended to place
the charging dock against the wall on a level, hard floor,
not on the carpet.
Always keep the charging dock powered on, otherwise
*
the robot vacuum will not automatically return.
* To ensure normal charging, please do not move the
charging dock frequently. After the location of the robot
vacuum is changed, the robot vacuum may regenerate
a map due to failure to relocate (for details, please refer
to this Manual > Operating I nstructions > Map
Management).
EN