ECOVACS ROBOTICS D600 Manuel D'instructions page 7

1. Important Safety Instructions
or come in contact with water. It must be
repaired by the manufacturer or its service
agent in order to avoid a hazard.
22. Turn OFF the power switch before cleaning
or maintaining the Appliance.
23. The plug must be removed from the
receptacle before cleaning or maintaining
the Charging Dock.
24. Remove the Appliance from the Charging
Dock, and turn OFF the power switch to the
Appliance before removing the battery for
disposal of the Appliance.
25. The battery must be removed and discarded
according to local laws and regulations
before disposal of the Appliance.
26. Please dispose of used batteries according
to local laws and regulations.
27. Do not incinerate the Appliance even if it
is severely damaged. The batteries can
explode in a fire.
28. When not using the Charging Dock for a
long period of time, please unplug it.
6
EN
29. The Appliance must be used in accordance
with the directions in this Instruction Manual.
ECOVACS ROBOTICS cannot be held liable
or responsible for any damages or injuries
caused by improper use.
30. The robot contains batteries that are only
replaceable by skilled persons. To replace
or remove the battery, please contact
Customer Service.
31. If the robot will not be used for a long time,
fully charge the robot and power OFF for
storage and unplug the Charging Dock.
32. WA R N I N G :
recharging the battery, only use the
detachable supply unit YJS015F-1900600G
provided with this appliance.
33. The Remote Control pre-installs two non-
rechargeable AAA batteries. To replace the
battery of the Remote Control, please turn
over the Remote Control, press and remove
its Battery Cover. Remove the batteries,
and insert the new batteries with the correct
F o r t h e p u r p o s e s o f