Perel WEH300 Mode D'emploi page 5


Check the cable hoist at regular intervals for signs of damage. The control switch
must be in good condition.

Have repair and servicing work carried out only by authorized workshops by a
trained electrician. Repair work must only be carried out by a trained electrician,
otherwise the machine may cause accidents.

Do not switch the appliance on and off quickly (inching mode).

Always concentrate fully when operating the cable hoist.

Do not stand or work under the raised load.

Make sure the steel cable is correctly wound around the reel and the pitch is equal
the cable diameter.
3. General Guidelines

Refer to the Velleman
manual.

All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.

Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.

Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical...) arising
from the possession, use or failure of this product.

Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
1
2
3
4
5
6
7
8
9
V. 04 – 12/06/2019
WEH200/WEH300
®
Service and Quality Warranty on the last pages of this
fastening bar
fastening hole for hook
drum
lever for max. cable length
auto stop mechanism lever
steel cable
cut-out weight
hook
emergency stop switch
push button
10
remote control
11
power cable
12
13 control cable
14 motor
return roller
15
additional hook
16
remote control cable
17
5 ©Velleman nv