Signature SCI562X Manuel D'utilisation page 57

Hints and tips
Warning:
To avoid possible electric shock,disconnect the power supply before replacing the lamp.
Only use 25-40W/230 V type G9, T300 C halogen lamps.
Replacing the oven light
1. Switch off and disconnect the power from the oven. Ensure that the internal parts are cool before
touching internal parts.
2. Remove the lamp cover by turning it counter-clockwise (note, it may be stiff)and replace halogen lamp
with a new one.
3. Re-fit the cover.
4. If in any doubt, consult a qualified electrician for help.
Trouble Shooting
9.
If a malfunction occ u rs, it often is due to a minor fault. Please read the follow instructions before
calling the after-sales service:
Problem
The oven does not work
Some hob zones are not
heating
Possi b le Cause
Blown Fuse
Incorrect setting
Installation
54
Please Check
Please check the fuse box that
the fuse is in working order
Please check all controls have
been turned to the desired
location
Please check that the appliances
terminal box has been correctly
installed (see installation
instructions)