Signature SCI562X Manuel D'utilisation page 54

The surface of the induction hob may be easily cleaned in the following way:
Type of
contamination
Light
Rings and lime
scale
Sweetmeat,melted
aluminium or
plastics
NB:Disconnect the power supply before cleaning.
8. Failure display and inspection
If any abnormality occurs,the induction hob will automatically go into protective mode
and display one of the following codes:
Fault
F3-F8
F9-FE
E1/E2
E3/E4
E5/E6
The above table shows how to assess and check common faults.Do not dismantle the
appliance yourself,otherwise you may damage the induction hob.
Method of cleaning
Immerse in hot water and
wipe dry
Apply white vinegar to the
area,wipe with a soft cloth or
use a commercially available
product
Use a special scraper for
ceramic glass to remove
residue （a silicon product is
best ）
Possible cause
Temperature sensor failure
Temperature sensor of the IGBT
failure.
Abnormal voltage in power
supply
Abnormal temperature
Poor heat radiation in cooking
zone
Cleaning materials
Cleaning sponge
Special adhesive for
ceramic glass
Special adhesive for
ceramic glass
Solutions
Contact the supplier
Contact the supplier
Check if power supply is
normal.
Power on after the power
supply is normal.
Check the pan.
Restart when cooking zone
cools down.
51