Signature SCI562X Manuel D'utilisation page 41

Install Anti-tilt Bracket
Warning: In order to prevent tipping of the cooker, the anti-
tilt bracket must be installed with cooker. To install Anti-tilt
bracket, use screwdriver to mount the anti-tilt bracket (1)
with screws (2) to the ground, as shows in Figure 3.
Figure 2
After fix anti-tilt bracket, push the electric cooker inside
cabinet as show in Figure 4. For correct installation, the
rear and right foot of cooker would be clipped by the anti-
tilt bracket.
Back Wall
50mm
B
A
Figure 3
Figure 4 4
38
Cabinet side
50mm