Urmet 1096/202 Manuel D'utilisation page 11

INSTALLATION
• Make sure that no units are powered before starting the installation procedure.
• Install the camera on the bracket and fasten it.
• Position the bracket to frame the required picture and fasten it to the wall or other flat surface.
• Connect the video output to the utility.
• Power the camera.
OPERATING FEATURES
MENU setting
TO SELECT THE VIDEO OUTPUT
The 1096/202 camera may use 2 different video outputs, which are on the same BNC connector:
•
High-definition 1080P AHD (Analog High Definition) video output
•
CVBS standard interlaced video output
If pressing the menu access button to the LEFT for a few seconds, you can select the 1080P/720P AHD
video output. If pressing it for a few seconds to the UP, you can select the CVBS video output.
MENU USE
The camera ref. 1096/202 uses a multi-level menu that allows to enable/disable or change camera settings.
MENUS SYSTEM DESCRIPTION
Once the menu access command has been performed, the access first screen will be displayed.
Once the item has been selected, the parameter can be changed choosing among the available options.
By selecting the item associated to the symbols
where other changes can be performed.
To quit the menu or the submenu and confirm the executed changes, select the item SAVE-EXIT and press
the central button.
To reactivate the default values select the item EXIT and press the central button.
DS1096-006A
LEFT
or it is possible to access to the next submenu,
UP
SET RIGHT
DOWN
11