Insignia NS-P3111 Guide De L'utilisateur page 15

NS-P3111 Compact Disc Player
P
ROGRAM PLAY
Use Program Play to play selected tracks on the CD in any order.
To set Program Play
Note
1 Press the PROG button and PGM starts flashing.
2 Press I<< or >>I to select the desired track.
3 After the desired track is displayed, press the PROG button to register.
The track number display changes to 00 again.
4 Repeat Step 2-3 to program the order of additional tracks. You may
program up to 20 tracks.
To complete programming and start play
• Press the PLAY/PAUSE button. PGM stops flashing and the programmed
tracks start playing.
To clear programming
Any of the following actions will clear your programmed tracks from memory:
• Register 00 on the first program track
• Opening the door
• Turning the player off
Programming can be set in the STOP mode or normal
play mode.
www.Insignia-Products.com 13