Télécharger Imprimer la page

BorMann BLF3550 Instructions page 3

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
E N
INSTRUCTIONS
Installation Points
1. Require the direction to the southwest and the best installation angle with
the horizontal plane. Due to the different latitudes, please refer to the local best
installation angle.See Table 1 below.
2. Require solar panels to be exposed to direct sunlight throughout the day
and not to buildings or trees.Wood and other obstruction to ensure the longest
exposure time (solar energy must not be used) Plate mounted under glass or
indoor). Only by installing solar panels correctly and scientifically can the best
charging effect be achieved.
Usage Method:
1. Check lights
The solar lamp has been charged before the factory and be can turned
on
normally,
please
before
light can be turned on or off, cover the solar panel with a Book
(orKeep it in the dark.If the lights show that the lamps are in
good
condition,
please
Note the following steps when installing during the day
Step 1: Turn on the switch.
Step 1: Cover the solar panels with paper and check if the lights are on, the lamp
is normal.
Note: The installation and inspection methods of all the above lamps are
roughly the same.
Remote Control Key Instructions
1. Turn ON/OFF button.
2. Light up for 2 hours then start radar mode.
3. Light up for 4 hours then start radar mode.
4. Light up for 6 hours then start radar mode.
5. Full radar mode.
6. Full bright mode.
Ζero electricity
365 days light
Remote
control
3
installation.
Check
feel
free
to
install
and
Wireless
Working time
> 12 hour
Dustproof
Ιnstallation Instructions
whether
the
use
them!
WWW.NIKOLAOUTOOLS.GR
Method 1
Ιntelligent Radar Induction Switch
Method 2
Step 1
Leatheroid
Step 2

Publicité

loading

Ce manuel est également adapté pour:

Blf3600052487052494