Publicité
Les langues disponibles
Les langues disponibles
Quickstart Guide (English)
Introduction
1. Make sure all items listed in the
foam sheet for the power cable and microphone.
2. Read the safety instruction booklet before using the product.
3. Study the
Connection
4. Make sure all input devices such as microphones, CD players, or digital media players are turned
off and volume settings are set at "zero."
5. Connect all devices as shown.
6. Switch everything on in the following order:
• Audio input sources (i.e. microphones, instruments, CD players)
• Pro Glow 10
7. When turning off, always reverse this operation:
• Pro Glow 10
• Any input devices
Box Contents
Pro Glow 10
Microphone with Cable
Remote Control
Power Cable (IEC)
Quickstart Guide
Safety Instructions & Warranty Information Booklet
Support
For the latest information about this product (system requirements, compatibility information, etc.)
and product registration, visit ionaudio.com.
For additional product support, visit ionaudio.com/support.
Caution: Do not expose Pro Glow 10 to rain or standing water.
Box Contents
Diagram.
are included in the box. Look in the box under the
3
Publicité
