ChiQ FBM317NEI32 Mode D'emploi page 8

2) Enabling the Fast-Freezing function
u
Press the Function key to select Fast Freeze until the corresponding icon gets flickering, and then press the OK key
within 5s for confirmation. If the OK key is not pressed within 5s, the setting will be invalidated.
3) Exiting the Fast-Freezing function
u
After a cumulative running period of 26 hours, the Fast Freeze function will exit automatically.
u
Under the Fast Freeze mode, press the Function key to select Fast Freeze until the corresponding icon gets
flickering, and then press the OK/Lock key for confirmation, the Fast Freeze function will get exited.
u
When the Smart function is enabled, the Fast-Freezing function will be disabled automatically.
★ Vacation
1） When the Vacation function is enabled, the freezer temperature will be controlled at 14℃. When you are out for a quite
long time, you can set the Vacation function to keep the refrigerator running with low energy consumption, while ensuring
the fresh food compartment is free from undesirable smell and the freezer compartment operates normally.
Be sure to take out all foods from the fresh food compartment before setting this function.
Under the Vacation mode, the fridge temperature is subject to no change.
2）Enabling the Vacation function
u
Press the Function key to select Vacation until the corresponding icon gets flickering, and then press the OK key
within 5s for confirmation. If the OK is not pressed within 5s, the setting will be invalidated.
3） Exiting the Vacation function
u
Under the Vacation mode, press the Function key to select Vacation until the corresponding gets flickering, and then
press the OK key for confirmation. The Vacation function will get exited.
u
When the Smart or Fast Cooling function is enabled, the Vacation function will be disabled automatically.
★ Power cut memory
In case of power failure, the refrigerator will maintain the operating state before power failure when power supply is
restored.
★ Power-on delay
In order to protect the refrigerator compressor from being damaged in the case of short-time power failure (i.e., less
than 5 minutes), the compressor will not be started immediately after it is powered on.
★ Over-temperature alarm (only after power outage)
When the refrigerator system is powered on, if the freezer sensor temperature is higher than -10℃, digits of the
freezer zone get flickering on the display. The freezer temperature can be displayed when any key is pressed, and
the normal display will be restored when any key is pressed again or after 10s.
★ Door open alarm
If any door is open for more than 3 minutes, buzzer alarms will be continuously issued, which can be stopped when
any key is pressed, but will be restored after 3 minutes if the door keeps open. The alarms will not be lifted until the
door is closed.
★ Fault alarm
In case E0, E1, E2, EH, or EC is displayed on the operation panel, it indicates fault with the refrigerator. Please
contact the aftersales person for visiting service in such case.
All manuals and user guides at all-guides.com
8
EN