Publicité
Les langues disponibles
Les langues disponibles
30" & 36" GAS RANGE INSTALLATION INSTRUCTIONS
7
Level the Range
Level the range and set cooktop height before
installation in the cut-out opening (if applicable).
1. Install an oven rack in the center of the oven.
2. Place a level on the rack (Figure 21). Take 2
readings with the level placed diagonally in one
direction and then the other.
Figure 21: Use the oven racks to level appliance
3. Level the range, if necessary, by adjusting the 4 leg
levelers with a wrench (Figure 22).
Leveling leg
Raise
Lower
Figure 22: Adjusting appliance height
4. Slide range into cut-out opening and double check
for levelness. If the range is not level, pull unit out
and readjust leveling legs, or make sure floor is level.
13
Base of Range
Decorative
Leg Screw
Publicité
