Camp Chef WOODWIND PG24WWS-2 Livret D'instructions page 7

Ash Cup
1. Install Ash Cup as shown in Fig 6. Never use
grill without Ash Cup in place.
FIG. 6
ASH CUP
Install Deflector and Drip Tray
1. Install the Heat Deflector and Drip Tray as
shown in Fig 7 and Fig 8.
FIG.7
Warming Rack and Cooking Grate
1. Install the Warming Rack and Cooking Grate as
shown in Fig 9.
M6 X 15 SCREW
WARMING RACK
GREASE BUCKET
COOKING GRATE
HEAT DEFLECTOR
CLEANOUT PORT CLOSED
HEAT DEFLECTOR
Clean-out Port Knob
FIG. 5
1. Clean-out Port knob must be pushed in when
grill is on. Make sure pullout lock is pushed
down and locks the knob to prevent inadvertent
opening of the clean-out port. See Fig 10.
2. Lift pullout lock and pull clean-out port knob to
empty ash into ash cup. See Fig 11
DRIP TRAY
3. See instructions for burner clean-out.
Probe
1. Plug the Meat Probe into the Probe receptacle
on the control panel. Run the probe and wire
through the probe access hole on the side of the
grill. See Fig 12.
DRIP TRAY
2. See instructions for Meat Probe.
FIG. 8
WARMING RACK
CLEANOUT PORT CLOSED
CLEANOUT PORT CLOSED
CLEANOUT PORT OPEN
PROBE
COOKING GRATE
FIG. 9
FIG. 10
FIG.11
DRIP T
HEAT DE
PROBE HOLE
FIG. 12