Publicité
Les langues disponibles
Les langues disponibles
Custom Panel General Information
Custom finishing options
• All installations must allow for the refrigerator
and freezer door to open a minimum of 90˚.
• For side wall or corner installation, allow for a
standard 3" (7.6 cm) cabinet filler to assure
door(s) opens 90˚.
Note: If a custom handle is used, a wider filler
may be necessary.
Custom Door Panel Installation
1
Remove handle side cabinet screws
and trim with a phillips screwdriver.
3
Remove bracket.
All manuals and user guides at all-guides.com
x13
14
• Panel thickness must not exceed 1" (2.5 cm)
on hinge side. Thicker panels will interfere with
door swing and clearance.
• Door panels should be installed after the
refrigerator has been plugged in for at least 24
hours.
2
x13
Remove all screws from handle side door trim.
Remove two screws from top and bottom door trim.
Remove handle side door trim.
4
2-1/16"
2-1/16"
(5.2 cm)
(5.2 cm)
2-13/16"
2-13/16"
(7.1 cm)
(7.1 cm)
Bottom-mount
Bottom-mount
Back of panel
Back of panel
"Z" bracket
"Z" bracket
Measure and mark the first hole for each bracket.
x2
x2
1-11/16"
1-11/16"
(4.3 cm)
(4.3 cm)
2-1/8"
2-1/8"
2-1/8"
(5.4 cm)
(5.4 cm)
(5.4 cm)
FOL bracket
FOL bracket
Publicité
