Simons Voss Technologies MOD.SOM8 Guide Abrégé page 28

All manuals and user guides at all-guides.com
6. Installation
6 Installation
28 / 140
IMPORTANT
Reverse polarity damages electronics
If you connect the power supply with the wrong polar-
ity, the electronics will be damaged.
Observe the polarity.

SmartOutput module "rattles" when the power
9
supply is connected.
9 SmartOutput module flashes red once every 16
seconds.
5. Power the SmartRelay.
9 SmartRelay detects SmartOutput module.
SmartOutput module flashes very quickly red/
9
green for one second.
SmartOutput module has been detected and
9
flashes green once every ten seconds.
SmartOutput module tested (see
ü
installation [
ü DIN rails available for installation.
1. Fit the SmartOutput module onto the DIN rail.
2. Switch off the power supply.
3. Connect all cables (see Connections).
4. Switch on the power supply.
IMPORTANT
Check polarity is correct.
27]
).
}
MOD.SOM8
Before
EN