Publicité
Les langues disponibles
Les langues disponibles
3172743-002 In-Fr. (ELECTROLUX) 17/10/14 09:33 Página 15
5. Press the time button (D) twice.
6. Set the desired temperature for the
inside of the meat using the
Hold the buttons in for a few
moments the first time. Then quickly
press them repeatedly.
7. Set a baking function and roasting
temperature.
When the probe senses the
temperature you selected in the meat
to be roasted, the oven switches off
and you will hear an acoustic signal.
8. Press any key to switch off the
acoustic signal.
7. USING THE ACCESORIES
7.1 Wire-Shelf and trays
Your oven will come supplied with the
following oven furniture:
(A) Oven shelf
(B) Enamelled deep baking tray
The numbers 1 – 5, indicate the different
shelf positions that you can utilise within
the oven.
buttons (see the table).
Roast
Roast beef
Roast beef
Roast beef
Leg of lamb
Shank
Loin (section)
Ham
Chicken
Roast turkey
9. Set the operating buttons of the oven
to the off position and remove the
and
Food Probe.
10. The perfectly roasted meat can now
be served.
PLEASE NOTE
When roasting with the Food Probe
you access the programming
functions of the timer such as the
clock timer, by holding the time button
in for a few moments. The
temperatures of the probe are always
displayed on the timer screen.The
clock timer is set when the timer
symbol lights up.
Probe temperature
35 - 40° C
45 - 50° C
55 - 60° C
65 - 70° C
80 - 85° C
65 - 70° C
80 - 85° C
75 - 80° C
80 - 85° C
You should use the shelf position(s) that
you find are best suited to your personal
cooking preferences.
Insert the oven shelf and deep baking tray
between the 2 side rails at any position (1 to
5) on both sides. The oven shelf has safety
stops to prevent accidental withdraw. After
engaging the oven shelf into the side rails,
as you push the oven shelf into the oven, lift
the front of the shelf slightly to bypass the
stops and allow the oven shelf to slide fully
into the rails.
To remove the oven shelf, gently pull the
oven shelf outwards. When the shelf
stops, lift the front slightly to bypass the
safety stops and then completely
withdraw the oven shelf from the oven.
When installed correctly, the shelf and tray
should be horizontal and not on an angle.
ENGLISH
15
Remarks
Rare
Medium
Well-done
Publicité
