Romus LP 650 MASSICOT Mode D'emploi page 9

SAFETY RULES FOR THE FLOORING CUTTER
1. READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE
OPERATING THE ROMUS MULTI-FLOORING CUTTERS.
2. If you are not thoroughly familiar with the operation of ROMUS Multi-
flooring Cutter, obtain advice from a qualified instructor or call
0033169796979
3. Stay alert. Do not operate while under the influence of drugs, alcohol, or
medication.
4. Always wear safety approved eye protection with side shields(ANSI
Z87.1)
5. Keep work area free of debris.
6. Keep children and unauthorized persons away from the ROMUS Multi-
flooring Cutter and work area.
7. Make sure tool is secure. Operate only on a firm substrate or solid stand.
8. Use the right tool. Do not force the ROMUS Multi-flooring Cutter or use
it for a job for which it was not designed; use only on approved
materials.
9. Keep the blade sharp. A dull blade will not perform properly.
10. Always keep hands away from blade while operating or carrying the
cutter.
11. Do not alter or misuse this tool. The ROMUS Multi-flooring Cutter is
precision built; modifications not specified in this manual may result in a
dangerous and unsafe environment.
12. Maintain the ROMUS Multi-flooring Cutter with care. Keep Blade sharp
and clean. Follow instructions for changing accessories.
13. Use only recommended accessories. The use of improper accessories
may be hazardous and cause injuries.
14. Never leave the ROMUS Multi-flooring Cutter unattended. Secure the
handle with the lock chain when not in use.
All manuals and user guides at all-guides.com
Mode d'emploi
LP 650 GUILLOTINE
REF. 93650