Whispbar K327W Instructions De Montage page 2

Fitting Kit
Items you will require:
Attention:
First Time Installation
Tape measure
Pen
Flat-head screwdriver
Craft knife
Side cutters or tin snips
Hammer
8mm (3/8") punch
Cordless drill
Depth stop
Vacuum cleaner
Rust inhibitor
Small paint brush
Neutral cure silicon sealant
Rivet gun
Attaches with permanent tracks riveted to
roof. Bar can be removed
Professional installation recommended.
Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
2
EN
K327W