Samsung RL3 A Serie Manuel De L'utilisateur page 44

Maintenance
A
44 English
Untitled-11 44
2. Gently lift the top cover (A) and place it
on top of the refrigerator.
- Be careful when you lift the top
cover (A). There is a wire connected
underneath it.
3. Remove the wire and the wire connector
placed on the holder underneath the top
cover.
- This step may not apply to some
models.
CAUTION
Do not pull the connectors too hard.
4. Disconnect the wire connector (A).
- This step may not apply to some
models.
A
5. Use a socket wrench (8 mm) to remove
the screws fastening the top hinge (A).
CAUTION
To prevent the fridge door from falling,
make sure to hold it tight while removing
A
the screws.
NOTE
You can also use a Phillips screwdriver to
remove the screws.
2021-06-28 5:30:42