(*): 15 mm (RB34) / 7 mm (RB38)
Untitled-11 65
H
*
*
9. Use the screws removed from step 8 to
fasten the rear bracket (H).
10. Check the spacing between the
refrigerators.
- After fastening the upper and lower
brackets, make sure the spacing
between the refrigerators is 7 or
15 mm at the top and bottom.
NOTE
If the spacing between the refrigerators
is greater than 7 or 15 mm, there may be
less room between the refrigerator and the
walls (or cabinets), and this may interfere
when opening the doors.
11. Push the refrigerators into the walls (or
cabinets).
- Have two people simultaneously
push the refrigerators, fixed with
brackets, into the walls (or cabinets).
NOTE
If the two people do not push the
refrigerators evenly, the rear parts of
the refrigerators may spread out or may
deviate from their intended spot.
12. Adjust the height of the refrigerators.
- Turn the leveling leg right or left to
adjust the height of the refrigerators
to be flush with the walls (or
cabinets).
English
65
2021-06-28
5:30:47