Caution! Care and cleaning
▪ Before maintenance, switch off the appliance and disconnect the mains plug from the
mains socket.
▪
Do not clean the appliance with metal objects, steam cleaner, ethereal oils, organic
solvents or abrasive cleansers.
▪
Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.
Installation Important !
▪
For electrical connection, carefully, follow the instructions given in this manual.
▪ Unpack the appliance and check if there are damages on it. Do not connect the
appliance if it is damaged. Report possible damages immediately to the place you
bought it. In this case retain packing.
▪ It is advisable to wait at least 24 hours before connecting the appliance to allow the oil
to flow back in the compressor.
▪ Adequate air circulation should be around the appliance, lacking this leads to
overheating. To achieve sufficient ventilation, follow the instructions relevant to
installation.
▪ Wherever possible the back of the product should not be too close to a wall to avoid
touching or catching warm parts (compressor, condenser) to prevent the risk of a fire,
follow the instructions relevant to installation.
▪
The appliance must not be located close to radiators or cookers.
▪
Make sure that the mains plug is accessible after the installation of the appliance.
ENERGY SAVINGS
▪
To reduce the power consumption of your device:
▪
Install it in a suitable location (see "Installing your appliance").
▪
Keep the doors open for as short time as possible.
▪
Do not put hot food into your device.
▪ Ensure the optimal functioning of your device by periodically cleaning the condenser
(see "Routine maintenance of your appliance").
▪ Ensure the optimal functioning of your device by not allowing too much frost accumulate
in the refrigerator (defrost it when the frost thickness exceeds 5-6 mm).
▪ Periodically check the door seals and make sure they always close effectively. If this is
not the case, please contact your after-sales service.
23