Nexigo PJ20 Mode D'emploi page 25

All manuals and user guides at all-guides.com
SYSTEM SETTINGS
Under the Setting
bottom options are the
Multi-media
Picture Setting
Projection
Mode
System Setting
OSD
Language
OSD Language:
Software Update: Update the software version on the projector.
1. Please check
update downloads.
2. Download the latest firmware to a USB flash drive, and then insert
the flash drive into a USB port on the projector.
3. In the on-screen menu select
Update.
4. The software will be updated automatically, do not try to use the
projector until the update is completed.
Note: The projector will be reset after the software updates, all saved
settings will be erased.
Restore Factory Setting:
Auto Sleep: Allows you to set a timer to turn the projector power off
automatically.
tab you will find the options listed below. The
System
Image
Scaling
Software
Update Factory Default
Choose the language used in the projector menus.
nexipc.com/pages/pj20
Reset the projector to factory default.
Setting.
Input Source
Aspect Picture
Ratio Mode
Restore
Auto
Sleep
if you have any issues for
Setting > System Setting > Software
Setting
Focusing
US 24