Nexigo PJ20 Mode D'emploi page 14

All manuals and user guides at all-guides.com
Multimedia
Supported
Resolution
AV CONNECTIONS
In order to use a device with a standard RCA connection you will need
to obtain an RCA to 3.5 mm adapter. Connect the adapter to the
projector as shown below, and then connect the RCA plugs from the
device to the RCA jacks on the adapter. You can also just use a singular
AV cable if this is an option for your device. Once connected, go into the
on-screen menu and select
US 13
Input Source
HDMI1
MultiScreen
640 x 480 1280 x 720
800 x 600 1280 x 800
1024 x 768 1280 x 1024
AV
HDMI2
AV
1366 x 768
1440 x 900
1440 x 960
under Input Source
Setting
1600 x 1200
1680 x 1050
1920 x 1080
as shown below.