Nexigo PJ20 Mode D'emploi page 23

All manuals and user guides at all-guides.com
CAST SETTINGS - CHANGE CASTING SETTINGS. SETTINGS ARE
LISTED BELOW:
WiFi Setting: Setup the WiFi connection for the projector.
Online Update: Update the casting firmware. (This is a separate
update from the primary projector firmware update that you will find
in the projector settings. This firmware will automatically update, so
this is only needed in case of an error with the auto updater.)
Restore Factory Default: Reset the cast software to factory default.
(Clears the WiFi password and/or caches.)
Software Version: Shows the current casting firmware version.
US 22