Maytag Commercial MDG20PDAXW Mode D'emploi page 5

CODE
OPTIONS TO USE IF SPECIAL PRICING IS SELECTED:
3.06 SPECIAL CYCLE PRICE
3.06 Represents the number of quarters (coin 1); may adjust
from 0–39 (See VALUE OF COIN 1 b.05). Advance from
0–39 by pressing HEAVY DUTY. Factory preset for 6
quarters = $1.50.
PR MODELS: Factory preset for 0 quarters.
→ Press the NORMAL key pad once to advance to next code.
4.05 SPECIAL DRY TIME
4.05 Represents the number of minutes per quarter (coin 1).
Factory preset for 5 minutes per coin.
Example: 6 quarters x 5 minutes = 30 minutes.
By pressing the HEAVY DUTY key pad, the value can
be adjusted from 1–75 minutes.
→ Press the NORMAL key pad once to advance to next code.
5.00 TIME-OF-DAY CLOCK, MINUTES
5.00 This is the TIME-OF-DAY CLOCK, minute setting; select
0–59 minutes by pressing the HEAVY DUTY key pad.
→ Press the NORMAL key pad once to advance to next code.
6.00 TIME-OF-DAY CLOCK, HOURS
NOTE: Uses military time – 24 hr. clock.
6.00 This is the TIME-OF-DAY CLOCK, hour setting; select
0–23 hours by pressing the HEAVY DUTY key pad.
→ Press the NORMAL key pad once to advance to next code.
7.00 SPECIAL PRICE START HOUR
NOTE: Uses military time – 24 hr. clock.
7.00 This is the start hour; select 0–23 hours by pressing the
HEAVY DUTY key pad.
→ Press the NORMAL key pad once to advance to next code.
8.00 SPECIAL PRICE STOP HOUR
NOTE: Uses military time – 24 hr. clock.
8.00 This is the stop hour; select 0–23 hours by pressing the
HEAVY DUTY key pad.
9.10 SPECIAL PRICE DAY
9.10 This represents the day of the week and whether
special pricing is selected for that day. A number
followed by '0' indicates no selection that particular day
(9.10). A number followed by an 'S' indicates selected
for that day (9.1S).
Days of the week (1-7) can be chosen by pressing the
HEAVY DUTY key pad. Press the DELICATES key pad
once to select special pricing for each day chosen.
When exiting set-up code '9', the display must show
current day of week:
DISPLAY DAY OF WEEK
10 Day 1 = Sunday
20 Day 2 = Monday
30 Day 3 = Tuesday
40 Day 4 = Wednesday
50 Day 5 = Thursday
60 Day 6 = Friday
70 Day 7 = Saturday
→ Press the NORMAL key pad once to advance to next code.
DO NOT REMOVE OR DESTROY
FOR SERVICE TECHNICIAN'S USE ONLY
EXPLANATION
CODE (selected)
1S
2S
3S
4S
5S
6S
7S
CODE
A.00 VAULT VIEWING OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
A.00 Not Selected 'OFF'.
A.SC Selected 'ON'. Press the DELICATES key pad once
for this selection. When selected, the money and/or
cycle counts will be viewable (depending on what is
selected) when the coin box is removed.
→ Press the NORMAL key pad once to advance to next code.
b.05 VALUE OF COIN 1
b.05 This represents the value of coin 1 in number of
nickels. 05 = $0.25.
By pressing the HEAVY DUTY key pad, there is the
option of between 1 and 199 nickels.
→ Press the NORMAL key pad once to advance to next code.
C.20 VALUE OF COIN 2
C.20 This represents the value of coin 2 in number of
nickels. 20 = $1.00.
By pressing the HEAVY DUTY key pad, there is the
option of between 1 and 199 nickels.
PR MODELS ONLY: For PR models using Enhanced
Debit, this field represents the value of top off in
nickels.
PR MODELS: Factory preset for $0.25.
→ Press the NORMAL key pad once to advance to next code.
d.00 COIN SLIDE OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
d.00 Not Selected 'OFF'.
d.CS Selected 'ON'. Press the DELICATES key pad 3
consecutive times for this selection.
When coin slide mode is selected, set 'b.' equal to
value of slide in nickels. Set '606' (regular cycle price)
and '3.06' (special cycle price) to number of slide
operations. NOTE: If the installer sets up 'CS' on a coin
drop model, it will not register coins.
→ Press the NORMAL key pad once to advance to next code.
E.00 ADD COINS OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. This option causes the customer
display to show the number of coins (coin 1) to enter,
rather than the dollars-and-cents amount.
E.00 Not Selected 'OFF'.
E.AC Selected 'ON'. Press the DELICATES key pad 3
consecutive times for this selection.
PR MODELS ONLY: In enhanced debit mode, this
option is not selectable.
→ Press the NORMAL key pad once to advance to next code.
EXPLANATION
5