Maytag Commercial MDG20PDAXW Mode D'emploi page 4

Control Set-up Procedures
IMPORTANT: Read all instructions before operating.
The fabric setting key pads, along with the digital display, are
used to set up the dryer controls. The display can contain 4
numbers and/or letters and a decimal point. These are used to
indicate the set-up codes and related code values available for
use in programming the dryer.
How to use the key pads to program the controls
1. The HEAVY DUTY key pad is used to adjust the values
associated with set-up codes. Pressing the key pad will
increment the value by one (1). Rapid adjustment is possible
by holding the key pad down.
2. The NORMAL key pad will advance you through the set-
up codes. Pressing the key pad will advance you to the
next available set-up code. Holding the key pad down will
automatically advance through the set-up codes at a rate of
one (1) per second.
3. The DELICATES key pad is used to select or deselect options.
Start Operating Set-Up
■ PD Models: Insert access door key, turn, and lift to remove
access door.
■ PR Models: Once the debit card reader is installed (according
to the reader manufacturer's instructions), the set-up mode
can be entered by inserting a manual set-up card (supplied by
the reader manufacturer) into the card slot. If manual set-up
card is not available, manual set-up mode can be entered by
removing connector AA1 on the circuit board.
IMPORTANT: The console must not be opened unless power is
first removed from the dryer. To access connector AA1:
→ Unplug dryer or disconnect power.
→ Open console, disconnect plug on AA1, close console.
→ Plug in dryer or reconnect power.
The dryer is now in the set-up mode.
Before proceeding, it is worth noting that, despite all of the
options available, an owner can simply choose to uncrate a new
commercial dryer, hook it up, plug it in, and have a dryer that
operates.
■ PD models are pre-set at the factory for fixed cycle price with
top off.
■ PR models are pre-set for free cycle operation so that they can
be run without readers or coins.
Set-up Codes
■ The NORMAL key pad will advance from code to code.
■ The HEAVY DUTY key pad will change the code value.
■ The DELICATES key pad will select or deselect options.
FOR PR MODELS: The set-up codes are the same as for the
PD models except where noted.
The set-up code is indicated by the one or two left-hand
characters. The set-up code value is indicated by the two or three
right-hand characters.
4
FOR SERVICE TECHNICIAN'S USE ONLY
CODE
6 06 REGULAR CYCLE PRICE
6 06 Represents the number of quarters (coin 1); may adjust
from 0–39 (See VALUE OF COIN 1 b.05). Advance from
0–39 by pressing HEAVY DUTY. Factory preset for 6
quarters = $1.50.
PR MODELS ONLY: Factory preset for 0 quarters.
→ Press the NORMAL key pad once to advance to next code.
7 05 REGULAR DRY TIME
7 05 Represents the number of minutes per quarter (coin 1).
PD MODELS: Factory preset for 5 minutes per coin.
Example: 6 quarters x 5 minutes = 30 minutes.
By pressing the HEAVY DUTY key pad, the value can
be adjusted from 1–75 minutes.
PR MODELS ONLY: Factory preset for 05 = 5 minutes.
→ Press the NORMAL key pad once to advance to next code.
8 00 TYPE OF DRYER PRICING
8 00 Fixed Cycle with Top Off. For detailed description, see
General User Information.
8 FC Fixed Cycle. For detailed description, see General User
Information.
Use the DELICATES key pad to make this selection.
PR MODELS ONLY: Factory preset for FC.
→ Press the NORMAL key pad once to advance to next code.
9 00 CYCLE COUNTER OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
9 00 Not Selected 'OFF'.
9 0C Selected 'ON' and not able to be deselected.
Press the DELICATES key pad 3 consecutive times
to select 'ON'. Once selected 'ON' it cannot be
deselected.
→ Press the NORMAL key pad once to advance to next code.
1.00 MONEY COUNTER OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
1.00 Not Selected 'OFF'.
1.0C Selected 'ON'.
Press the DELICATES key pad 3 consecutive times to
select 'ON' and 3 consecutive times to remove (Not
Selected 'OFF'.) Counter resets by going from 'OFF' to
'ON'.
1.C0 Selected 'ON' and not able to be deselected.
To select 'ON' and not able to be deselected, first select
'ON', then within two seconds press the DELICATES
key pad twice, the HEAVY DUTY key pad once, and
exit the set-up mode.
→ Press the NORMAL key pad once to advance to next code.
2.00 SPECIAL PRICING OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
2.00 Not Selected 'OFF'.
2.SP Selected 'ON'. Press the DELICATES key pad once for
this selection.
If SPECIAL PRICING OPTION is selected, there is access to
codes '3.' through '9.'.
→ Press the NORMAL key pad once to advance to next code.
EXPLANATION
DO NOT REMOVE OR DESTROY