Pur Line VENTY TO 100 WIFI Manuel D'utilisation page 12

EN
USE
Check the household voltage to ensure it matches the appliance's rated specification. Be sure to
plug into a 220-240V~, 50-60Hz outlet.
Once the power is connected, the unit will make a "beep" sound to indicate it's ready for operation.
1. SPEED:
Press button, the fan will start to run at speed "3" (default speed). To adjust the fan speed, press
the repeatedly, the speed will be set to "3-4-5-6-7-8-1-2-3... " successively. The corresponding
speed LED indicators will illuminate.
2. TIMER:
Press button to set the timer between 0.5 and 7.5 hours, incremented in 0.5 hour intervals.
The corresponding LED indicator will light up.
3. OSCILLATION:
Press button once, the fan will oscillate from left to right (or right to left). Press it again to cancel
the oscillation function.
4. REMOTE CONTROL
1) Install one CR2025 lithium button cell battery.
2) The operation of the remote control is the same as that of the control panel of the unit.
Attention: Do not allow children to play with the remote control.
5. WI-FI CONNECTION
Once the fan is switched on, the Wi-Fi indicator will flash, indicating that it is connecting to internet.
Once connected, the indicator will stop blinking and stay long light.
Press ("5" on the remote control) three times quickly to reset the Wi-Fi settings.
Note: The buzzer on the bladeless fan generate a sound for each operation.
10